VGM 일괄 업로드

The VGM is the measurement of a shipping container’s total weight, including its contents.

Effective from 1st July 2016, a packed container is not allowed to be loaded on board vessels unless its VGM has been provided by to the ocean carrier prior to the load list cut-off date.

Deadline for submission of VGM is published on our website under local schedule.

Please make sure to submit VGM on time. Without VGM your container will not be loaded.

If you have any further inquiries, our booking team will be happy to assist you.

For purposes of this regulation, the full responsibility falls to that of the Shipper who appears on the Carrier’s B/L.

ZIM will receive the VGM from the Freight Forwarder consolidating the cargo and not the separate weights of each different part of the shipment.

The Tare of the containers can be found on the door of the container. You are welcomed to call your local Customer Service representative to receive this information as well.
We intend to provide an option on the ZIM.com website to retrieve the Tare of the container.

This is determined locally. The Carrier is responsible to include the VGM in the load list submitted to the terminal. Each terminal requires the load list at a different point in time prior to vessel arrival. Our agents will provide the cutoff time. We intend to provide the VGM Cutoff time on our booking confirmation.

The VGM can be submitted by one of the following channels:

Submit our online form for VGM declaration
Use ZIM bulk VGM declarations form - enabling reporting multiple VGM at once
VERMAS EDI or other EDI through the E-Commerce Portals
Email to the Local Booking Agent - quick list to local offices can be found here
Include it on the Shipping Instructions as long as they are sent in a timely manner

Haulers contracted by the Carrier will be requested to ensure they know when the VGM will be provided by the Shipper.

Yes – there are terminals which will require the VGM before the container enters the gate. We are preparing a list of these terminals worldwide and will publish it accordingly.

The IMO Guidelines are as follows:

6.3.1. Because the contract of carriage is between the shipper and the shipping company, not between the shipper and the port terminal facility, the shipper may meet its obligation under the SOLAS regulations by submitting the verified gross mass to the shipping company. It is then the responsibility of the shipping company to provide information regarding the verified gross mass of the packed container to the terminal representative in advance of ship loading. Similarly, the shipper may also submit the verified gross mass to the port terminal facility representative upon delivery of the container to the port facility in advance of loading.

6.3.1.1 The master or his representative and the terminal representative should enter into arrangements to ensure the prompt sharing of verified container gross mass information provided by shippers. Existing communication systems may be used for the transmission and sharing of such verified container gross mass information.

6.3.1.2 At the time a packed container is delivered to a port terminal facility, the terminal representative should have been informed by the shipping company whether the shipper has provided the verified gross mass of the packed container and what that gross mass is.

The VGM will need to be provided before the container enters the terminal.

The Shipper must weigh the cargo/container and provide an accurate rate. Each Country will decide the tolerance they are willing to accept in cases of discrepancies.

Containers that do not have a VGM at the closing time and date will not be able to be loaded on the vessel.

if any charges are received from the port because the container was not loaded, due to lack of VGM, we will have no choice but to roll this charge to the Shipper.

No. Not all terminals will provide a weighing solution. Shippers should find a weighing solution that does not rely on the terminal services.

The Carrier will not be validating the weight provided by the Shippers in their VGM and will proceed with vessel planning based on this weight.

The responsibility of validating the VGM is that of the local authorities in each country. They will determine their penalty individually.

As of July 1st, 2016 all containers being loaded to a vessel MUST have a VGM or cannot be loaded. The same holds true for any container, regardless of its duration in the port.

VGM 일괄 업로드

All you need to know about SOLAS-VGM

What is the Verified Gross Mass (VGM)?

When should the VGM be submitted?

Who is the “Shipper” in the context of the responsibility for providing the VGM?

For consolidated cargo – who provides the VGM to the Carrier?

Where can we find the Tare of the containers?

What is the cutoff time to submit the VGM?

How can the VGM be submitted to the agents?

Will the VGM need to be provided to the Land Transportation haulers?

Are there terminals which will require the VGM before the container enters the gate?

Does the terminal receive the VGM from the Carrier or directly from the Shipper?

Direct delivery to the vessel – when does the VGM need to be provided?

Will the governments apply a tolerance threshold for the accuracy of the weight?

What will happen to the container in the port if the VGM was not received on time?

Who will pay for any expenses incurred due to lack of VGM (demurrage, storage etc)?

Will all terminals be able to provide a Weighing solution?

Will the Carrier re-weigh the container or validate the VGM provided by the Shipper?

What is the penalty for discrepancies between the VGM and the weight found to be different?

What about long standing containers that were in the port prior to July 1st? Will a VGM be required before loading?